Log in or Register for enhanced features | Forgotten Password?
White Papers | Suppliers | Events | Report Store | Companies | Dining Club | Videos
Green Power
Return to: CTBR Home | Green Power | Solar

Bolymedia to showcase BolySolar Tripler at SNEC PV Power Expo in China

Published 18 April 2017

Bolymedia will be showcasing its new product, the BolySolar Tripler at SNEC PV Power Expo to be held between April 19-21 in Shanghai, China.

BolySolar is a complete set of solar system technologies that will revolutionize the entire energy industry. At SNEC 2017, we will be showcasing our fourth product of BolySolar concentrators – the BolySolar Tripler.

The BolySolar Tripler is a concentrated solar power module (CSP) that combines Fresnel lenses and mirrors into a trapezoid-shaped concentrator. This design concentrates light onto a PV panel 1/3 the size of a standard PV panel. The concentrated light compensates for the reduced panel size, producing higher wattage outputs compared to a standard-sized PV panel system.

Compared to other CSP technologies, BolySolar Tripler’s simple design brings forth many advantages:

This design brings down PV module costs by 20-40%, selling at less than $0.25/watt – making it the most cost effective energy source today.

There is no need for a sun tracking system, and it can be applied to almost any surface. The BolySolar Tripler CSP is designed to adapt to the Sun’s seasonal and daily changes.

The design is safer than regular PV modules due to the PV panel being sealed inside the Tripler PV module. The PV panel is not exposed to rain and dust that may cause short circuits or fire. The operating temperature of the BolySolar Tripler is approximately 60o C or lower, which is the same or lower than non-concentrated PV modules.

The BolySolar Tripler can be made as thin as regular PV modules and has a higher wind load tolerance due to its structural design.

The BolySolar Tripler is designed to be applicable to an array of current installations already in use. By keeping current installations in mind, Bolymedia is able to design the BolySolar Tripler to easily adapt to the following solar system setups:

Utility-scale PV installations.

Existing racks (fixed or sun-tracking) without the need for any change.

Rooftop or wall-mounted installations in the form of glass or clay tiles.

Water surface installations. The BolySolar Tripler does not require any additional floating support structures.

The BolySolar Tripler is currently being tested with samples. Mass production will begin in Q3 2017.

Source: Company Press Release